|
|
Build Your Online Product Catalogs?
| Product Name: |
Black Color PCB Electronic Potting Silicone HY 215
|
| Supply Ability: |
|
| Related proudcts |
silicone rubber, rtv silicone, rtv, |
| Specifications |
0.17*0.14*0.24kg |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
200kg |
| Unit Price: |
6.5-9.8usd/kg |
|
Technical Parameters for PCB Electronic Potting Silicone
Properties index
Part A
Part B
Before Curing
Appearence
Black fluid
Colorless / yellowish fluid
Viscosisty (cps)
2500500
-
Features when operation
Mixing Ratio ( By weight)
10:1
Operating Time (25C /min)
20~30
Curing time ( hr, basically cured)
3
Curing time ( hr, perfectly cured)
24
Hardness(shore A)
15+/-3
After Curing
Thermal Conductivity[W( mK)]
0.4
Dielectric Strength( kV/mm)
25
Dielectric permittivity(1.2MHz)
3.0~3.3
Volume resistivity(cm)
1.01016
Fire Resistance
94-V1
(Pls note all data of PCB Electronic Potting Silicone Rubber with black color above is in 25C with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated).
Warm Tips for for PCB Electronic Potting Silicone
1. Sealing package for storage. The mixture should be used up at once to avoid wasting.
2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,
it does not affect the performance.
Shelf Life and Transportation
1. Twelve(12) months when stored at 25C in original unopened packages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
Technical Guidelines
1. Pls put part A and B in separate container and stir evenly before mixing the two
parts together.
2. Mixing Ratio part A:part B is 10:1
3. Bubble release if necessary, deaeration the mixture under 0.08 *** for 3 minutes.
4. HY-215# is cured at room temperature, so pls put it under room temperature after
pouring. It comes to next process when basically cured, and it takes about 24 hours
for completely cured.
More information about the silicone rubber, pls contact Ms Penny:
Tel: +8 |
| Company: |
Hong Ye Jie Technology Co., Ltd.
|
| Contact: |
Ms. Penny Liu |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang |
| Postcode: |
518117 |
| Tel: |
86 0755 89948019 |
| Fax: |
86 0755 89948030 |
| E-mail: |
|
|
|
|
Home
